Join for free
Dobra's Avatar
Dobra
Senior Member
Dobra is offline
Isle of Wight GB
Joined: Sep 2011
Posts: 1,301
Dobra is male  Dobra has posted at least 25 times and has been a member for 3 months or more 
 
11-03-2016, 10:49 PM
1

Central Heating Pump Replacement

I put the CH pump in about ten or so years ago, but now it is worn out. Have bought a new Wilo pump to replace it, but am wondering about the direction of flow from or too the boiler.

Last time, I just replaced it in the same position as the previous one, but now I don't know whether that was right. So the question is - is flow either way acceptable, or critical to the CH operation?

Thanks.
OldGreyFox's Avatar
OldGreyFox
Chatterbox
OldGreyFox is offline
South Yorkshire
Joined: Feb 2015
Posts: 21,202
OldGreyFox is male  OldGreyFox has posted at least 25 times and has been a member for 3 months or more 
 
11-03-2016, 11:08 PM
2

Re: Central Heating Pump Replacement

Originally Posted by Dobra ->
I put the CH pump in about ten or so years ago, but now it is worn out. Have bought a new Wilo pump to replace it, but am wondering about the direction of flow from or too the boiler.

Last time, I just replaced it in the same position as the previous one, but now I don't know whether that was right. So the question is - is flow either way acceptable, or critical to the CH operation?

Thanks.
On my system Dobra, the pump pulls the water round (as opposed to pushing) and it is at the cool end of the system where the water returns to the boiler. Little arrow on the pump indicating direction of flow. I would imagine you should keep the pump as cool as possible. Hope this helps Dobra.
Judd's Avatar
Judd
Chatterbox
Judd is offline
West Riding of Yorkshire
Joined: Oct 2015
Posts: 12,538
Judd is male  Judd has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 12:18 AM
3

Re: Central Heating Pump Replacement

Originally Posted by Dobra ->
I put the CH pump in about ten or so years ago, but now it is worn out. Have bought a new Wilo pump to replace it, but am wondering about the direction of flow from or too the boiler.

Last time, I just replaced it in the same position as the previous one, but now I don't know whether that was right. So the question is - is flow either way acceptable, or critical to the CH operation?

Thanks.
As OG says, make sure the flow of the pump is the correct way round especially important if you have TRV valves fitted to your radiators.

It wouldn't hurt to flush the system out while the old pump is still fitted before fitting the new one.
galty's Avatar
galty
Chatterbox
galty is offline
rainham essex
Joined: Aug 2009
Posts: 6,080
galty is male  galty has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 11:08 AM
4

Re: Central Heating Pump Replacement

Pump flow is from the boiler to the controls/diverter valves.

Do it the other way round if you are on an unpressured system it can cause a few problems.

If on a combi it will not work.
galty's Avatar
galty
Chatterbox
galty is offline
rainham essex
Joined: Aug 2009
Posts: 6,080
galty is male  galty has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 11:09 AM
5

Re: Central Heating Pump Replacement

Originally Posted by Judd ->

It wouldn't hurt to flush the system out while the old pump is still fitted before fitting the new one.
Think that would need an expert to do.
Judd's Avatar
Judd
Chatterbox
Judd is offline
West Riding of Yorkshire
Joined: Oct 2015
Posts: 12,538
Judd is male  Judd has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 11:20 AM
6

Re: Central Heating Pump Replacement

Not necessarily, drain some of the water down from the system and pour in some specialised cleaner at one of the radiators. Run the c/h for a few days then drain the lot completely before filling up with fresh water with some protective additive. Make sure that the additive is suitable for your boiler as some of the newer aluminium boilers can react to it.
galty's Avatar
galty
Chatterbox
galty is offline
rainham essex
Joined: Aug 2009
Posts: 6,080
galty is male  galty has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 11:46 AM
7

Re: Central Heating Pump Replacement

Originally Posted by Judd ->
Not necessarily, drain some of the water down from the system and pour in some specialised cleaner at one of the radiators. Run the c/h for a few days then drain the lot completely before filling up with fresh water with some protective additive. Make sure that the additive is suitable for your boiler as some of the newer aluminium boilers can react to it.
I can do that but you are saying that to the topic starter asking which way he fits a pump.
malcolm
Chatterbox
malcolm is offline
UK
Joined: Aug 2015
Posts: 5,016
malcolm is male  malcolm has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 01:06 PM
8

Re: Central Heating Pump Replacement

I would advise changing the boiler to a more modern one which does not need an external pump at all !
OldGreyFox's Avatar
OldGreyFox
Chatterbox
OldGreyFox is offline
South Yorkshire
Joined: Feb 2015
Posts: 21,202
OldGreyFox is male  OldGreyFox has posted at least 25 times and has been a member for 3 months or more 
 
12-03-2016, 01:45 PM
9

Re: Central Heating Pump Replacement

Originally Posted by malcolm ->
I would advise changing the boiler to a more modern one which does not need an external pump at all !
Big Bucks Malcolm, and much upheaval, although if it's an old boiler wait until the summer and change it then rather than wait until it gives out - possibly in the winter...Brrrr I'm in a similar situation myself. Got a back boiler that's twenty years old, not been a spot of bother and I can service it myself.....But I think the time is nigh!
 



© Copyright 2009, Over50sForum   Contact Us | Over 50s Forum! | Archive | Privacy Statement | Terms of Use | Top

Powered by vBulletin Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.